China Foton 4X2 High Efficiency Sewer Working Fecal Suction Truck for Sale pto shaft clutch

Merchandise Description

FOTON 4X2 Sewage Suction Truck /Fecal Suction Truck/FOTON 4m3 Fecal Suction Truck
 

HangZhou Chary Machinery CO., LTD
Contact: 

Our business will offer you you the substantial high quality products with a low value, swift shipping,and specialist soon after-sale support.

 

one. Our 3-20CBM Bathroom Vacuum Force Sewer Vans largely is made up of: PTO (Energy Get Off), Transmission shaft, vacuum pump, drinking water and gas separator, oil and gas separator, multiple directional handle valve, hanger rod, sewage tanker, movement valve, sucking gun, drinking water tank, vacuum pressure gauge and piping method, and so on.
2. Normal metal (Carbon metal Q235 & Q345, also the Stainless metal can be select) for the tank, in opposition to corrosion resistant, rust security and effectively-resisting.

3.The specific elements of Bathroom Vacuum Stress Sewer Vans optional water cycle vacuum pump are composed of electrical power just take off, a transmission shaft, a water cycle pump, stress tank, hydraulic portion, pipe line, vacuum strain gauge, stage gauge, and hand wishing device.

four.4000Liters Drilling Fluids Vacuum Truck with water cycle vacuum pump equips higher electrical power vacuum suction pump, higher good quality hydraulic method.

A casting tank, the tank head can open up, double cylinder dumping.

The filthy drinking water can be dumped straight by means of the rear go over, has a high diploma of vacuum (higher than the feces vacuum truck), massive tonnage, substantial performance, broad application.

 

 

 

HangZhou Chary Machinery CO., LTD
Call: 

 

FOTON 4X2 Sewage Suction Truck /Fecal Suction Truck/FOTON 4m3 Fecal Suction Truck

 

Item FOTON 4m3 fecal suction truck
Tank ability 4m3
Vacuumpipe 5 meters
Parameters General dimension L/W/H (mm) 5950×2000×2630
  Control Mass(kg) 3900
  Approach / Departure angle(°) 23/fifteen
  Entrance /rear overhang(mm) 1120/1470
  Fuel Kind Diesel
  Max Pace(km/h) ninety
Motor Sort N490QB
  Displacement(ml)/Electricity(kw) 2544/42
  Maker ZheJiang Quanchai Energy Co., LTD
  Emission standard Euro 1
Transmission box 5Forward Gears 1 reverse equipment
Chassis Travel position Left hand drive
  Cab 1 row
  Air issue Optional
  Travel variety 4×2
  Wheelbase(mm) 3360
  Tread(entrance/rear) 1415/1485
  Number of spring films(entrance/rear) four/6

Multiple Delivery Methods TO Preserve Transport FREIGHT FOR YOU

HangZhou Chary Equipment CO., LTD
Call: 

WHY Decide on US?

Experience
ten several years experience of production,revenue,analysis and improvement in the discipline of unique vehicles.

Specialization
We can make in accordance to your demand from customers, the material,the size, the colour and the brand is optional for you.

Excellent top quality
Has solid technology, sophisticated equipments Reliant top quality and adaptable modes of procedure also have stringent high quality control technique and handed the iso9001-2008 and the 3c (china compulsory certification),with SGS,BV certifcate as nicely.

Chassis offer
We have a very excellent prolonged time period cooperation connection with chassis company, These kinds of as SINOTRUK, BEIBEN, FAW, FOTON, IVECO, SHACMAN, SHXIHU (WEST LAKE) DIS.I, CIMC, XIHU (WEST LAKE) DIS.FENG and so on.

OUR Service

(1) Much more than three hundred staff ,large and superior production 
(2) Have skilled engineer,can offer the very best remedies
(3) With trying to keep excellent relation with SINOTRUK, FOTON, ISUZU, DFAC, FOTON, CZPT chassis manufacturing facility.
(4) Construct rigorous QC group to promise the high quality
(5) Personal great income group, can supply warm follow-up services.
(6) Spare Areas Source:
We have our very own spear elements departments,have sturdy generation and distribution functionality. We can fulfill your need within 2-7 days. We always do our very best to fix the problems, and put our customers’ pursuits in the 1st place. And We can Source Spare Elements For Many Brand names, Such as SINOTRUK, BEIBEN, FAW, FOTON, IVECO, SHACMAN, SHXIHU (WEST LAKE) DIS.I, CIMC, XIHU (WEST LAKE) DIS.FENG and so on.

HangZhou Chary Equipment CO., LTD
Call: 

HangZhou Chary Machinery CO., LTD
Phone: 

FAQ

1, How to obtain the trailer truck from your company?
You can decide on the product from our site, also you can inform our revenue manger your certain specifications and we will suggest the suited model to you. Following confirming the model and price tag, we can sign the deal.
 
two,How to guarantee item good quality?
To begin with,we passed the global top quality technique certification. Next, Produced in China Team has executed discipline certification for our manufacturing unit. Finally,You can entrust third party men and women or companies to inspect our goods ahead of shipping.
 
three, How to visit your factory? 
After you arriving at China, you can fly to HangZhou airport. HangZhou airport is positioned in HangZhou Metropolis, ZheJiang Province. Our driver will meet up with you at HangZhou airport and just take you to our manufacturing facility by car.

FOTON 4X2 Sewage Suction Truck /Fecal Suction Truck/FOTON 4m3 Fecal Suction Truck

WELCOME TO Speak to US

If you are interested in any of development equipment for sale,please come to feel cost-free to make contact with me. Also, welcome to China and visit our construction machinery factory for development machinery price or to discuss a lot more information.

HangZhou Chary Equipment CO., LTD
Call: 
   

 

US $13,700-16,500
/ unit
|
1 unit

(Min. Order)

###

Type: Fecal Suction Truck
Load Capacity: 4T
Certification: ECE, GCC, CE, ISO9001, DOT, CCC, ISO/TS16949
Wheel Base: 3360
Tread: 1820mm
Grade: Light Duty

###

Customization:

###

Product FOTON 4m3 fecal suction truck
Tank capacity 4m3
Vacuumpipe 5 meters
Parameters Overall dimension L/W/H (mm) 5950×2000×2630
  Curb Mass(kg) 3900
  Approach / Departure angle(°) 23/15
  Front /rear overhang(mm) 1120/1470
  Fuel Type Diesel
  Max Speed(km/h) 90
Engine Type N490QB
  Displacement(ml)/Power(kw) 2544/42
  Manufacturer Anhui Quanchai Power Co., LTD
  Emission standard Euro 1
Transmission box 5Forward Gears 1 reverse gear
Chassis Drive position Left hand drive
  Cab One row
  Air condition Optional
  Drive type 4×2
  Wheelbase(mm) 3360
  Tread(front/rear) 1415/1485
  Number of spring films(front/rear) 4/6+7
  Tire Type 6.50-16
Equipment
 
Equipped with vacuum pump, anti-overflow valve ,
 oil-water separator power take off, transmission shaft, fecal tank, pipe network, fecal pipe for observing and cleanout equipment
Time for full suction less than 5min
US $13,700-16,500
/ unit
|
1 unit

(Min. Order)

###

Type: Fecal Suction Truck
Load Capacity: 4T
Certification: ECE, GCC, CE, ISO9001, DOT, CCC, ISO/TS16949
Wheel Base: 3360
Tread: 1820mm
Grade: Light Duty

###

Customization:

###

Product FOTON 4m3 fecal suction truck
Tank capacity 4m3
Vacuumpipe 5 meters
Parameters Overall dimension L/W/H (mm) 5950×2000×2630
  Curb Mass(kg) 3900
  Approach / Departure angle(°) 23/15
  Front /rear overhang(mm) 1120/1470
  Fuel Type Diesel
  Max Speed(km/h) 90
Engine Type N490QB
  Displacement(ml)/Power(kw) 2544/42
  Manufacturer Anhui Quanchai Power Co., LTD
  Emission standard Euro 1
Transmission box 5Forward Gears 1 reverse gear
Chassis Drive position Left hand drive
  Cab One row
  Air condition Optional
  Drive type 4×2
  Wheelbase(mm) 3360
  Tread(front/rear) 1415/1485
  Number of spring films(front/rear) 4/6+7
  Tire Type 6.50-16
Equipment
 
Equipped with vacuum pump, anti-overflow valve ,
 oil-water separator power take off, transmission shaft, fecal tank, pipe network, fecal pipe for observing and cleanout equipment
Time for full suction less than 5min

Power Take-Off (PTO) Shafts

Power take-off (PTO) shafts are used on many types of machines, including jet aircraft. They are typically semi-permanently mounted to a marine or industrial engine, and are powered by a drive shaft. The drive shaft also powers secondary implements and accessories. Depending on the application, accessory drives may also be used in aircraft. There are four main types of PTO units used in jet aircraft.

Power take-off (PTO) shaft

Shaft CollarThe power take-off (PTO) shaft of a tractor can be controlled to operate in one of two modes: automatic and manual. Automatic mode operates when the PTO shaft starts turning and is automatically engaged when the power lift is raised by actuating the lift lever 9. Manual mode operates when the lift lever is not raised.
The manual mode allows for manual adjustments. A retaining band 12 may be adjusted arcuately about PTO shaft S with an axial center parallel to the axis of the PTO shaft S. The retaining band may be secured by conventional over center clamps. The retaining band 12 may also be adjusted arcuately about pin or bolt 30.
Power take-off (PTO) shaft safety retainers are used to prevent unintended disconnection of the PTO shaft. The safety retainers comprise a stationary openable band that circumscribes the PTO shaft near the connection with driven machinery. The band is preferably offset from the axis of the PTO shaft.
While the PTO shaft is a convenient way to transfer mechanical power to farm implements, there are several inherent hazards associated with using it improperly. Accidental disconnections of the PTO shaft pose a significant risk for the operator. A disconnect can cause the PTO shaft to whip around the driven machinery, potentially causing injury.
Power take-off shaft entanglements can be devastating to the limbs trapped in them, requiring amputation in some cases. In addition to being dangerous, the PTO shafts must be fully guarded to prevent contact with the ground. A farmer must never get too close to an operating PTO shaft to protect their own safety.

Types

There are several different types of PTO shafts available to suit various applications. They can vary in size and number of splines. Each standard has a specific speed range and is designed to fit a variety of implements. For example, there are German and Italian types of PTO shafts.
The type of PTO shaft you choose will determine the maximum load that can be safely transferred. Depending on the type, the rate at which the PTO clutch engages will be different. For example, a lower-density PTO shaft will engage at a slower rate than a higher-density PTO shaft, while a higher-density shaft will be more tolerant of higher loads.
The primary function of a PTO shaft is to secure equipment to the tractor or other agricultural equipment. These parts often feature safety shields on both ends. They are also made in the same shape as the secondary shaft. The front shaft is wider than the secondary shaft, which allows the secondary shaft to fit inside. However, during movement, pieces of the PTO shaft can collapse, making them less safe.
PTO shafts are expensive and easy to steal, so make sure to protect your investment. Make sure the PTO shaft has guards to protect it from thieves. There are two types of PTO shafts: the external and the internal PTO yokes. Internal PTO shafts have an internal PTO yoke, while external PTO shafts use a universal joint. There is also a safety chain and shield on the external PTO shaft.
Depending on the application, you can choose between several different kinds of PTO shafts. Some types of PTO shafts have multiple splines, which can increase the torque transmitted. For applications requiring accuracy and precision, you may want to use a parallel keyed shaft.

Connections

Shaft CollarA PTO shaft has two parts: an input and an output. The input portion of a PTO adapter shaft has a smaller diameter, and the output portion has a larger diameter. Both are connected by splines. These splines have tapered outer ends. The first bore 25 has a first frustoconical wall, while the second bore has a second frustoconical wall.
One of the most common causes of PTO shaft failure is a poorly adjusted clutch. Another common cause is improper lubrication of the PTO shaft’s wide angle joints. PTO shafts should be lubricated at least once every eight hours. If you fail to do this, you risk premature ware and reduced life expectancy.
When a PTO shaft is installed in a tractor, the tractor must be connected to the implement using a coupler frame. The coupler frame has a PTO adapter mounting flange that engages with the PTO stub shaft. The coupler frame can move to accommodate the PTO adapter shaft, and the PTO adapter shaft can pivot and slide with the coupler frame.
When a PTO shaft fails, it can result in damage to the tractor and implement. Identifying the cause will help you fix the problem. Constant compression of the PTO shaft can damage the connecting shafts and connections. This could damage the tractor or implement, resulting in expensive repairs. When this happens, it is important to cut or shorten the shaft to reduce the risk of damage.
PTO shaft 24 extends rearward from tractor 10 and is connected to the front universal joint 28 and first end of variable-length splined drive shaft 32. The shaft is connected to a drive mechanism 36 on a mobile work implement 34. This drive mechanism may be mechanical, hydraulic, or a combination of both.

Safety

It is very important for every person using a tractor to understand the safety of PTO shafts. PTOs can be extremely dangerous, and without the correct shielding, they can cause serious injury. It can also be very dangerous if someone accidentally steps on or falls on one while the machine is operating. This is why it is important for everyone using a tractor to read the manufacturer’s manual and follow the safety guidelines for PTO shafts. Moreover, PTOs must only be used for the purpose intended.
PTO safety should be the number one priority for every operator. A small child was tragically killed when he became entangled with a spinning PTO shaft. His father tried to pull him out of the shaft, but was unable to do so. His clothing, which was near the spinning shaft, caught on the PTO and dragged him into it. His body was thrown around the shaft several times, and he sustained injuries to his leg, right arm, and head.
The PTO shaft is an important part of a tractor, and is used to secure the equipment. It is usually secured by safety shields on both ends. There are several kinds of safety shields. One type is a shield that is attached to the front of the PTO shaft. Another type is a shield that rotates freely on its bearings.
Power takeoffs are common on most small and compact tractors, construction machinery, and other equipment. They rotate to provide the drive for the equipment. However, the PTO shaft is very dangerous because it can easily catch something that gets too close to it. Moreover, loose items can also get tangled around the PTO shaft.

Maintenance

Shaft CollarOne of the most important things to do in order to keep your PTO shaft in top condition is to keep it properly greased. This can be done by using a grease gun or a hand pump. It is important to keep the grease fresh and apply it in the appropriate amounts depending on how much you use the PTO. It is also important to separate the primary and secondary shafts and remove any debris from them.
It is also important to check the spline threads on your PTO on a periodic basis. This is important because some signs of dry shafts are not always immediately apparent. Similarly, spline threading and corrosion can occur behind the scenes and go undetected. Proper PTO maintenance is a vital part of safe and efficient operation.
A damaged or worn drive shaft will prevent your car from turning freely, leaving you exposed to higher repair bills. In addition, it will drastically affect the performance of your car. A broken drive shaft can even result in a crash. You should take your vehicle to a mechanic as soon as you notice any of these problems.
Fortunately, most PTO-driven equipment is equipped with a shear pin to prevent collisions and prevent damage to the gearbox and shaft. It should also be replaced regularly to prevent excessive wear. Long bolts pose a risk of entanglement and can easily catch clothing or gloves. For safety reasons, it is important to disengage the PTO when not in use.
Another thing to do is to keep the PTO shields clean. They must be regularly rotated and tested. Always ensure that your drawbar is properly configured for your machine. This prevents stressing or separating the driveline.
China Foton 4X2 High Efficiency Sewer Working Fecal Suction Truck for Sale     pto shaft clutchChina Foton 4X2 High Efficiency Sewer Working Fecal Suction Truck for Sale     pto shaft clutch
editor by czh 2023-01-09