China Waste Collection Vacuum Tanker 20000L 22000L Sewage Suction Tank Trailer for Sale pto shaft angles

Merchandise Description

I. Description of Waste collection vacuum tanker 20000L 22000L sewage suction tank trailer for sale

Function:

(1) Vacuum sewage suction truck (also named truck mounted sewage cleaner,vacuum cleaner truck ,vacuum suction truck ,vacuum suction tanker ,vacuum waste collection truck ,sewage suction truck,sewage vacuum truck ,squander vacuum truck ,sewer truck ,cesspit emptier ,gully emptier,and many others.) is utilized to gather, transportation and discharge liquid this kind of as dirty drinking water,sludge,septic,crude oil and strong stuff these kinds of as tiny stones,bricks as effectively.It is ideal for cleaning the sewer,cesspit,gully ,and many others. It is broadly utilized in setting and sanitation subject.

(2)Accent of sewage suction operate :Outfitted with PTO, transmission shaft, vacuum suction sewage pump, substantial strain molding tank, moisture separator, fuel-oil separation, numerous directional manage valve, hanger rod, self-discharging valve, suck fecal gun and pipe network technique.

(3) Vacuum tank ability ranges from 3,000 Liters to twenty,000 liters 

Functions:

a.Cylinder vacuum tank can be lifted hydraulically to 40-forty five diploma.Rear doorway can be opened and shut hydraulically.

 

b.Adopt EU vacuum pump (Italy brand) or equal China prime brand double vacuum pumps,tremendous strong,very successful.

 

c.Pump can be operated by a hydraulic motor or by an auxiliary motor.

 

d.Overfill method with songs CZPT is geared up ,avoiding the vacuum pump harm from sewage h2o into vacuum pump when the tank is complete.

 

e.Nice condition ,rational structure,resilient and lengthy support daily life.

II. Complex of Waste assortment vacuum tanker 20000L 22000L sewage suction tank trailer for sale
 

Technical Parameter
Tank Trailer Overall Dimension (mm) 10000*2500*3800
Tare Fat (kg) 11000
Payload (kg) 20000
Tank ability (liter) 13000
Tank content Q345
Tank thickness (mm) 8
Baffle & Ring 3 internal baffles and exterior 5 rings
Drinking water tank One set, potential 1000liters
Discharge valve One established, 4″ size
Sewage suction technique Generator 1 set, CZPT 420
Vacuum pump 1 set
Axle 2 axles 13tons, CZPT brand
Tire 12R22.5, whole 9 parts with 1 spare tire, triangle model
Landing leg 18tons, JOST brand
Kingpin 90#
Suspension Mechanical suspension, JOST manufacturer
Brake Method Air tank One set
Brake Chamber six parts, 2 items T3030, 4pics T30
Air connector One particular set regular air connector
Valve One particular established, CZPT model
Electrical technique 7-PIN socket 1 established
Lamb One particular set of regular LED lights
Cable 1 set
Spare wheel carrier One established
Portray Complete Chassis sand blasting to thoroughly clean rust, 1 coat of anti-corrosive primary, 2 coats of closing paint

 

III.  Details photos of Waste collection vacuum tanker 20000L 22000L sewage suction tank trailer for sale
 

 

V. VACUUM SEWAGE SUCTION TRUCK WORKMANSHOP

VI. Far more Option OF VACUUM SEWAGE SUCTION TRUCK FOR YOUR REFERENCE.

VII. Shipping and delivery:RORO/BULK VESSEL/CONTAINER 

  
RORO: The truck is pushed to the ship inside immediately and fastened nicely. It can defend the truck being rusty and damaged during shipping and delivery.

BULK:  The truck is lifted by crane then place on the vessel deck. This design is considerably less costly.

CONTAINER: The truck is put into the container. This product is utilized for small design trucks

VIII. ABOUT US  

ZheJiang MANTEN Car CO.,LTD  is an approved specific truck manufacturer which has several years in style ,solution ,revenue and services in special vans like as growth truck , hearth truck, manlift truck, tank truck , garbage truck, tipper truck , wrecker truck , refrigerated truck and and many others

(1) Much more than 500 personnel, large and innovative production 
(2) twenty five skilled engineers, can offer the best and most affordable style
(3) Construct strict QC staff to promise the good quality
(4) 1 year or 30,000km guarantee which will come 1st.
(5) A single set of spare parts of chassis offered which will aid you help save funds on upkeep. 
(6) Provide technological support and right after serive for existence.
(7) Specialist product sales team which will help you to decide on suited truck.

 

US $32,000-39,000
/ UNIT
|
1 UNIT

(Min. Order)

###

After-sales Service: 7X24 Hours Online / Training
Warranty: 1 Year
Certification: ISO9000, CCC
Emission Standard: Euro II/III/IV/V/VI
Payload: 20T
Transmission Type: Manual

###

Customization:

###

Technical Parameter
Tank Trailer Overall Size (mm) 10000*2500*3800
Tare Weight (kg) 11000
Payload (kg) 20000
Tank capacity (liter) 13000
Tank material Q345
Tank thickness (mm) 8
Baffle & Ring 3 inner baffles and outside 5 rings
Water tank One set, capacity 1000liters
Discharge valve One set, 4" size
Sewage suction system Generator One set, WEICHAI 420
Vacuum pump One set
Axle 2 axles 13tons, FUWA brand
Tire 12R22.5, total 9 pieces with one spare tire, triangle brand
Landing leg 18tons, JOST brand
Kingpin 90#
Suspension Mechanical suspension, JOST brand
Brake System Air tank One set
Brake Chamber 6 pieces, 2 pieces T3030, 4pics T30
Air connector One set standard air connector
Valve One set, WABCO brand
Electrical system 7-PIN socket One set
Lamb One set of standard LED lights
Cable One set
Spare wheel carrier One set
Painting Complete Chassis sand blasting to clean rust, 1 coat of anti-corrosive prime, 2 coats of final paint
US $32,000-39,000
/ UNIT
|
1 UNIT

(Min. Order)

###

After-sales Service: 7X24 Hours Online / Training
Warranty: 1 Year
Certification: ISO9000, CCC
Emission Standard: Euro II/III/IV/V/VI
Payload: 20T
Transmission Type: Manual

###

Customization:

###

Technical Parameter
Tank Trailer Overall Size (mm) 10000*2500*3800
Tare Weight (kg) 11000
Payload (kg) 20000
Tank capacity (liter) 13000
Tank material Q345
Tank thickness (mm) 8
Baffle & Ring 3 inner baffles and outside 5 rings
Water tank One set, capacity 1000liters
Discharge valve One set, 4" size
Sewage suction system Generator One set, WEICHAI 420
Vacuum pump One set
Axle 2 axles 13tons, FUWA brand
Tire 12R22.5, total 9 pieces with one spare tire, triangle brand
Landing leg 18tons, JOST brand
Kingpin 90#
Suspension Mechanical suspension, JOST brand
Brake System Air tank One set
Brake Chamber 6 pieces, 2 pieces T3030, 4pics T30
Air connector One set standard air connector
Valve One set, WABCO brand
Electrical system 7-PIN socket One set
Lamb One set of standard LED lights
Cable One set
Spare wheel carrier One set
Painting Complete Chassis sand blasting to clean rust, 1 coat of anti-corrosive prime, 2 coats of final paint

The Different Parts of a PTO Shaft

Power Take-Off (PTO) shafts are an integral part of a tractor’s driveline. Without them, a tractor cannot operate. It is essential to understand the different parts of a PTO shaft, as they are crucial for the operation of your tractor. These parts are typically overlooked during routine tractor maintenance checks, but knowing more about them will help you practice on farm machinery better.

Tractor’s power take-off (PTO) shaft

Shaft CollarA Tractor’s power take-off (or PTO) shaft transfers power from the tractor to an implement. These shafts typically rotate at speeds between 540 and 1000 rpm. A number of safety features help prevent accidental contact between the shaft and the implement.
In order to avoid this problem, tractor operators should be vigilant while operating their tractors. They should make sure that the tractor’s power take-off (PTO) shaft is shielded. These shields include a master shield for the PTO stub, a PTO integral journal shield, and an implement input connection shield. The PTO master shield is mounted on the tractor and extends over the PTO stub on three sides. It is designed to prevent collisions between the tractor and any connected machine drive shaft.
A power take-off (PTO) shaft is an important component on any tractor. It is a shaft that transmits mechanical power from a tractor to an implement or separate machine. Early PTOs used a transmission and were located at the rear of the tractor. They are now available with hydraulic or mechanical drivelines. These power take-offs transfer the tractor’s power to a secondary piece of equipment through a driveshaft.
Proper PTO shaft guards protect people from stepping on rotating shafts. The PTO should not compress fully at any point in the operating range. It should have several inches of overlap at the maximum operating extension. A PTO guard should be positioned properly for each machine.
Despite these benefits, there are still many risks associated with PTO shafts. These powerful and potentially dangerous pieces of machinery can cause severe injury if not used safely. Luckily, proper installation of safety shields can reduce the risk of injury.

Types

PTO shafts come in a variety of different shapes, sizes, and materials. The most common types are square and round, but there are also star-shaped and trilobed types. While the star-shaped type is a typical North American design, the trilobed and lemon-shaped varieties are typically German or Italian. Typically, the lemon-shaped ones are made of an alloy called ‘Lemon Yellow.’ In some cases, the shaft will come with snap rings.
Different manufacturers use various materials for their PTO shafts. The tube of a welded drive shaft must be strong enough to handle the force exerted by the PTO. There are many different materials available, but some are stronger than others. Before choosing the type of drive shaft that is right for your machine, make sure that you know the exact measurements of your driveline.
When deciding between different types of PTO shafts, you must also consider the materials that will be used for your particular application. While splines are the most common material for PTO shafts, you can find various types that have different uses. Carbon steel is malleable and has a low carbon content, which makes it more reliable. A ferrous steel is more durable and contains metals like nickel, chromium, and molybdenum, which make it a great alternative to carbon steel.
A PTO gearbox input shaft extends between the PTO gearbox and the PTO clutch. It is mounted with a toothed wheel 8. An inductive sensor 9 on the shaft outputs a pulsed electronic signal based on the rotational speed of the shaft. These pulsed signals are called inductive speed sensors.

Rotation direction

The PTO shaft is a critical part of the power take-off of a farm tractor. It allows the tractor to transfer power from the engine to an implement such as a mower or other garden equipment. The rotation direction of the PTO shaft depends on the type of implement. Some implements only accept rotation in one direction, while others require rotation in both directions.

Safety chain

Shaft CollarOne of the best ways to protect your PTO shaft is to use a safety chain. A safety chain is a chain that is attached to the PTO shaft, and it prevents the plastic shield from spinning on the shaft. This chain should be fastened to a suitable point on your machine or tractor. It should not be attached to the lower lift arms or the U-guard.
PTO shafts can be very dangerous if they are not guarded. They can rotate as high as 1000 rpm and could seriously injure you. It is also important to ensure that the PTO shaft guard is fitted correctly, and that the tractor is turned off before working on it. In addition, avoiding wearing loose clothing when working around a PTO shaft can help protect your life.
Another way to protect the PTO shaft is to shield the IID shaft. This can be done by using shielding over the straight part of the shaft, the PTO connection, or the Implement Input Connection. A protruding bolt or pin can catch clothing and snag it. If not shielded, the clothing can wrap around the shaft, trapping the person against it.
A good safety chain should be positioned between the tractor and the PTO shaft. The chain should be at least 50 mm wider than the PTO shaft, and should be in good condition. It should cover the entire length of the PTO shaft from the tractor to the first bearing. The PTO shaft must also be fitted with the correct bearing ring. It is also vital to ensure that the PTO guard does not bend or break, as this could result in damage to the PTO shaft.

Shield

Shaft CollarA PTO shaft shield protects the PTO shaft from possible impacts. It is typically made of plastic, but can also be made of metal. These shields are easy to damage, and are therefore preferably made of a durable material. The shields are held in place with brackets. The shields are made with two parts: an inner shield and a protective sleeve.
An improvement to the PTO shaft shield is a bracket that supports both the outer and PTO shaft. It is shown in conjunction with a towed machine in FIGS. 2 and 7. FIG. 7 is a side elevation of the bracket mounted to the tongue of the machine. This shield is designed to prevent the PTO shaft from becoming damaged during the towed process.
The main risk associated with PTO mishaps is entanglement, which can result in serious injuries. If a shaft separates from a tractor, it can strike nearby workers or people. Proper maintenance can minimize the risk of entanglement and save lives. Thankfully, equipment manufacturers have made huge strides in reducing the risk of these accidents. Operators should always make sure that the PTO shaft shield is in place to avoid the risk of entanglement.
In addition to preventing entanglement, a PTO shaft shield also helps protect the universal joints that are mounted on the PTO shaft. The shield is made of plastic or steel. It is typically shaped like an inverted U and covers both the top and sides of the shaft. A detachable PTO shaft shield is also available.
As with all parts of a PTO driveline, the PTO shaft shield should be maintained to prevent damage to the bearings. It is necessary to inspect the shield and replace it whenever it becomes damaged. PTO equipment is often used outdoors, and it is frequently exposed to crop debris, rust, and dirt that can affect the bearings. Proper maintenance will extend the equipment’s lifespan and reduce maintenance costs.
China Waste Collection Vacuum Tanker 20000L 22000L Sewage Suction Tank Trailer for Sale     pto shaft anglesChina Waste Collection Vacuum Tanker 20000L 22000L Sewage Suction Tank Trailer for Sale     pto shaft angles
editor by czh 2023-01-07